Ahmed Hassan Ibrahim Awad

Assistant Professor at Design and Production Engineering

Career Information

Academic Information

Brief

Ahmed H. Awad works at the Materials Engineering & Metallurgy Lab Testing, Engineering Consulting Center, Faculty of Engineering, Ain Shams University, Cairo, Egypt. His previous research was related to metallurgy at the Advanced Functional Metallic Materials lab (AFMM), Department of Materials Science and Engineering, Egypt-Japan University of Science and Technology, University in New Borg El Arab City, Alexandria, Egypt. The work goal in this lab is to design, produce, and characterize new low-cost and high-strength alloys. His previous research work was related to polymeric matrix composites. One of his last projects was "Solid Materials Recycle" in the material science and engineering field at the Design and Production Engineering Department, Faculty of Engineering, Ain Shams University, Cairo, Egypt. The work scope was utilizing, reusing, and characterizing the solid waste materials to obtain a novel composite material.

Awards

-1st Ranked at the China competition of academic and technological works, Beihang University, University in Beijing, China, April 2015.
-3rd Prize from “the International Graduate Summer School in Aeronautics and Astronautics. Beihang University, a University in Beijing, China. July 2018.
-Among the twenty-eight staff members of the Faculty of Engineering, Ain Shams University, who received the International Publication Award (Batch 25 in 2021).
-Among the ten staff members of the Faculty of Engineering, Ain Shams University, who received the International Publication Award
(Batch 26 – Jan 2020).
-Among the sixty-six faculty members of the Faculty of Engineering, Ain Shams University received the International Publication Award (Batch 28 – Jan 2021).

Books

N/A

Publications

1. Awad, A.H., El-Hofy, H.A., Chiba, A., Gepreel, M.A.-H., " Robust mechanical properties and corrosion resistance of new low-cost hot-forged and aged β-type Ti–14Mn–(x)Zr alloys ", Journal of Alloys and Compounds, 2022
2. Awad, A.H., El-Gamasy, R., Abd El-Wahab, A.A., Abdellatif, M.H., " Assessment of mechanical properties of HDPE composite with addition of marble and granite dust ", Ain Shams Engineering Journal, 2020
3. Awad, A.H., Gepreel, M.A.-H., " Basic characterization of new Ti-Mn-Zr alloys ", Materials Today: Proceedings, 2020
4. Awad, A.H., Abdel-Ghany, A.W., Abd El-Wahab, A.A., El-Gamasy, R., Abdellatif, M.H., " The influence of adding marble and granite dust on the mechanical and physical properties of PP composites ", Journal of Thermal Analysis and Calorimetry, 2020
5. , " Mechanical and Physical Properties of PP and HDPE ", Engineering Science (ES), 2019
6. Awad, A.H., Aly Abd El-Wahab, A., El-Gamsy, R., Abdel-latif, M.H., " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
7. Awad, A.H., Abdellatif, M.H., " Assessment of mechanical and physical properties of LDPE reinforced with marble dust ", Composites Part B: Engineering, 2019
8. Awad, A.H., El-gamasy, R., A. Abd El-Wahab, A., Hazem Abdellatif, M., " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
9. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
10. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
11. A. H. Awad, Ahmed W. Abdel-Ghany, Ayman A. Abd El-Wahab, Ramadan El-Gamasy & Mohamed Hazem Abdellatif, " The influence of adding marble and granite dust on the mechanical and physical properties of PP composites ", Journal of Thermal Analysis and Calorimetry, 2020
12. A.H. Awad ⇑ , Ramadan El-Gamasy, Ayman A. Abd El-Wahab, Mohamed Hazem Abdellatif, " Assessment of mechanical properties of HDPE composite with addition of marble and granite dust ", Ain Shams Engineering Journal, 2020
13. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical and Physical Properties of PP and HDPE ", Engineering Science, 2020
14. Ahmed H. Awad , Shimaa El-Hadad, Mostafa Ahmed, and Ramadan N. Elshaer, " Effects of Multistage Aging Treatment on the Microstructure and Mechanical Properties of α + β-Type Ti-6Al-7Nb Alloy ", Journal of Materials Engineering and Performance, 2023
15. Ahmed H. Awad, Hayam A. Aly, Modar Saood, " Physical, mechanical, and corrosion properties of Ti–12Mo and Ti–15Mo alloys fabricated by elemental blend and mechanical alloying techniques ", Materials Chemistry and Physics, 2024
16. Ahmed H. Awadm Modar Saood, Hayam A. Aly, Ahmed W. Abdelghany, " Role of Mo and Zr Additions in Enhancing the BAlloys for Implant Materials ", Metals and Materials International, 2024
17. Alaa Mahmoud Hussein ; Ahmed H. Awad; Hayam A. Ali; Gamal Abd Elnaser; Tharwat Elsarag; Shaban Abdo4, " Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants ", International Journal of Materials Technology and Innovation, 2024

Research Projects

Research Projects:
1. Project of Developing Materials Analysis & Characterization Laboratory and Qualifying for International Accreditation, Rule: CO-PI, For a project to develop and accredit laboratories internationally in higher education institutions, Fourteenth session (LP14), Ministry of Higher Education and Scientific Research, Egypt, 2025/running.
2. Integrating Advanced Self-Cleaning Coating and High Thermal Conductive Technologies for Enhancing Solar Photovoltaic Performance in Severe Environment Conditions, Rule: Team Leader, Science, Technology and Innovation Funding Authority (STDF) - Egypt, 2025/running.
3. (Development of an Innovative Metal/Ceramic Additive Manufacturing Technique for Efficient and Lightweight Automotive Applications, Rule: CO-PI, Science, Technology and Innovation Funding Authority (STDF) - Egypt, 2025/running.
4. Design Optimization of BJAM 3D Printing Technology and Market Readiness for Commercialization. Rule: Team Leader, ITIDA- Egypt, 2025/running.
5. Advanced Manufacturing and Characterization of Titanium Alloys via Wire Arc Additive Manufacturing for Structural Applications, Rule: PI, Ain Shams University, Egypt, 2023/2024.
6. CFP240-Development of Binder Jet Additive Manufacturing Machine for Metallic and Ceramic Products, Rule: Team Leader, ITIDA- Egypt, 2023/2024
7. German Egyptian Mobility Program for Scientific Exchange and Excellence Development (GE-SEED), Rule: Researcher, STDF – Germany, 2020/2021
8. New Lower Cost Corrosion Resistant Alloys for Better Performance Water Desalination Systems, Rule: Researcher, STDF – USA, 2021.